Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Placentia, CA
Chimney repair in Placentia usually comes down to one of two jobs: a cracked clay tile liner in an older masonry chimney, or a leaking cap and flashing around a factory-built metal flue. The housing here splits almost evenly between those two systems, and each one fails in its own way. Our team handles both, and we work with professional-grade materials from HeatShield and Gelco so the fix lasts. If you’re seeing water stains near the fireplace or hearing debris fall inside the flue, call (866) 632-0270 and we’ll take a look.
Why Placentia Homes Are Different
Placentia doesn’t have one housing stock; it has at least three side by side. Near downtown you’ll find early-1900s bungalows and post-war tract homes with original brick-and-mortar chimneys. Many of those flues were built with a thin parged clay tile or no liner at all, and after decades of settling and the occasional small earthquake, that tile has cracked or separated. A routine sweep in those homes often turns into a liner-repair conversation, because the flue is no longer containing heat and gases the way it should.
Drive east toward the newer planned communities near the 92870/92871 boundary and the picture changes. Those homes have builder-installed prefab fireplaces that get used a few times a year at most, often as decorative “flip-a-switch” inserts. The metal flues are short and direct-vented, but they still collect soot, and their caps and flashings age in the Placentia sun. Warm, dry summers and mild winters mean creosote sits undisturbed for long stretches, so a fall inspection before the short burn season matters more than it would in a colder climate. The same city needs two different service models, and we’re set up for both.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Placentia Services
Placentia homeowners call us most about keeping the flue clean and keeping the dryer vent from becoming a fire hazard. Both are maintenance jobs that protect the house, and both are services we handle as a focused chimney and ventilation contractor.
Chimney Sweep in Placentia
A Chimney Sweep in Placentia is not a once-a-decade chore here. Because fireplaces get used only a few weeks each year, creosote and soot sit in the flue for months at a time between burns. In older masonry chimneys, that buildup accumulates on cracked clay tile and makes the next fire riskier than the last one. In prefab fireplaces, the sweep is faster but just as important, because the direct-vent flue can clog with nesting material and soot. We remove the buildup, check the flue from top to bottom, and tell you plainly if anything needs repair. Call (866) 632-0270 to book a sweep.
Dryer Vent Cleaning in Placentia
Lint is the leading cause of home dryer fires, and Placentia’s warm, dry air makes that lint even more combustible. A Dryer Vent Cleaning in Placentia removes the buildup that slows your dryer down and turns the vent into a fire risk. We clean the full run from the dryer connection to the exterior vent, check the airflow, and make sure the termination is clear. Many Placentia homes have longer vent runs through walls or up through the roof, and those are the ones that need cleaning most. One visit usually gets the job done, and you’ll notice shorter dry times right away.
Chimney Repair in Placentia
Chimney repair in Placentia splits into two very different jobs depending on the home’s age. The older downtown-adjacent blocks have original masonry chimneys from the early to mid 20th century, and many of those flues were built with only a thin parged clay tile that has cracked from decades of settling and minor seismic movement. The newer east-side tracts have factory-built metal fireplaces with short, direct-vent flues that fail at the cap, the flashing, or the pipe joints. Our focus at Chimney Repair is fixing the problem correctly using professional-grade materials, not patching it. When you call, we inspect first and explain what we found before recommending any work.
Chimney Liner Installation
Signs you need it
You see cracked tile pieces in the firebox, notice a smoky smell even when the fireplace isn’t in use, or your sweep reports that the flue liner has separated.
What it costs in Placentia
Chimney liner installation in Placentia typically runs $2,500 to $5,200 depending on flue height and liner type.
How we do it
We measure the flue, choose a properly sized liner, and install it from the top down so the flue is sealed and safe to use again.
Chimney Crown Repair
Signs you need it
You see cracks running across the concrete crown at the top of the chimney, or water stains appear on the ceiling near the fireplace after rain.
What it costs in Placentia
Chimney crown repair in Placentia is typically priced between $600 and $1,400 depending on how much of the crown needs rebuilding.
How we do it
We clean the existing crown, repair or rebuild the damaged sections, and apply a weather-resistant coating so water stops getting into the masonry.
Chimney Flashing Repair
Signs you need it
Water leaks into the attic or down the chimney chase after a storm, or you can see rust and lifted flashing at the roofline.
What it costs in Placentia
Chimney flashing repair in Placentia generally runs $350 to $950 for most accessible chimneys.
How we do it
We remove the old flashing, refit new pieces around the chimney base, and seal the joints so water runs off the roof instead of through it.
Chimney Cap Installation
Signs you need it
Birds or debris have gotten into the flue, or you find rusted, damaged, or missing cap components on the chimney top.
What it costs in Placentia
Chimney cap installation in Placentia typically costs $200 to $600 including the cap and mounting hardware.
How we do it
We select a cap that fits the flue opening, secure it to the crown, and test that draft still moves freely after installation.
What Chimney Repair Costs in Placentia
| Item | Typical range in Placentia |
|---|---|
| Chimney liner installation | $2,500 – $5,200 |
| Chimney crown repair | $600 – $1,400 |
| Chimney flashing repair | $350 – $950 |
Do I need a new liner or just a sweep?
A sweep removes buildup; a liner fixes a flue that can no longer contain heat and gases. If the sweep reveals cracked or missing tile, the liner needs attention. Call (866) 632-0270 and we’ll show you exactly what we found.
How long does a chimney repair take in Placentia?
Most flashing and cap repairs are done the same day we can get to the roof. A liner installation usually takes most of a day. We’ll give you a clear timeline on the written estimate.
Brands We Service in Placentia
We install and service flue systems built around professional-grade materials, including HeatShield for ceramic resurfacing and Gelco for masonry and crown work. We also work with Olympia Chimney and Famco components for caps and terminations. Parts are sourced from trade suppliers and our brands page covers the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Placentia, CA
| Service | Typical range in Placentia |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney liner installation | $2,500 – $5,200 |
| Chimney crown repair | $600 – $1,400 |
| Chimney flashing repair | $350 – $950 |
| Chimney cap installation | $200 – $600 |
| Dryer vent cleaning | $120 – $300 |
In Placentia, older masonry chimneys with hard-to-reach crowns or deteriorated flue tile will push pricing toward the higher end, as will longer dryer vent runs through walls or roofs. The written estimate you receive before any work starts is the price you pay, and the estimate itself is free.
Neighborhoods We Serve in Placentia
We work throughout Placentia, from the older blocks near downtown to the planned communities on the east side. Our team knows both masonry flues in the early-1900s bungalows and direct-vent metal systems in the newer tracts.
- Old Town Placentia
- Placentia Cove
- Atwood
- Placentia Village
- East Placentia planned communities
We schedule our Placentia routes by area, so response time typically depends on where our crew is that day rather than where you live.
Service Area – Cities Near Placentia
If you’re in a neighboring city, we likely cover it too. We work regularly in Brea, CA, Rowland Heights, CA, La Mirada, CA, and La Puente, CA. Each area has its own housing patterns, but the same repair standards apply. Call (866) 632-0270 and we’ll confirm scheduling for your address.
Serving Placentia, CA – Our Local Coverage Area
We serve Placentia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Placentia
Yes. We service the full city, including the 1990s and 2000s two-story tracts near the 92870/92871 boundary. Those homes typically have factory-built fireplaces, and we inspect, clean, and repair those systems regularly. Call (866) 632-0270 to schedule.
Most sweeps, cap replacements, and flashing repairs do not require a permit. A full liner installation or major structural repair may, depending on the scope. We’ll tell you on the estimate if a permit is needed, and you can confirm with Placentia’s building department.
We answer 24/7 and dispatch crews from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Your written estimate is free, and scheduling is based on the next available route in your area.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Placentia Customers Say
"Showed up when they said they would. That's most of the battle."
- Alejandro Torres"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Danielle Lawson"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Michelle Park